 | Reporting and Display Arguments |
| Reporting and Display Arguments |
- / -
/C (Load Alternate Configuration File)
/FTPPASSIVE (Force FTP passive mode on)
/GC (Set File Comparison Value)
/GD (Set Job Comparison Delta)
/GE (Set Shared Process Delay)
/GF (Use Alternate Copy File Methods)
/GH (Set FTP Short Date Format)
/GI (Ignore File Size and/or Date Comparison)
/GJ (Set FTP Failed Upload Retry Count)
/GL (Display status in Profiler)
/GLS (Display status in Profiler - Supress Initial Connection)
/GO (Enable PSObserver Broadcasts)
/GQ (Create and Append Summaries into One Report)
/GR (Report Non Standard Events)
/GS (Enable Summary Statistics Collection)
/GV (Always Create Superset during Bi-directional Sync)
/GX (Use Delete Path for Revisions)
/H- (Only Hide the about screen)
/I (Ignore Target Space During File Copy)
/KA (Active Connection Interval)
/LA (Real-time Attribute Change)
/LB (Bi-directional Folder Deletion)
/LC (Use Last Access File Time)
/LD (Set Trigger Folder File Name)
/LE (Use Enhanced bi-directional synchronization mode)
/LH (Set Deletion Move To Folder Cleanup Interval)
/LI (Target In-Use Replacement)
/LJP (Always Run Post Process)
/LJU (Exclude Folders that have a Reparse Point)
/LL (Disable Real-time Security Change)
/LM (Set Failed Connection Timer)
/LMD (Disable Failed Connection Timer)
/LN (Set Processor Affinity)
/LPC (Set Maximum Number of Events to Process)
/LPD (Set Delay between Enhanced Real-Time Deletions)
/LPE (Set Delay between Enhanced Real-Time Event Processing)
/LPM (Set Enhanced Real-Time Event Upper Limit)
/LPQ (Set Delay between Enhanced Real-Time Queue Checking)
/LPW (Set Enhanced Real-Time Event Queue Delay)
/LPX (Set Process Delay for Enhanced Real-time Changes)
/LR (Run application at start of PeerSync)
/LSE (Log Service Events to the Event Viewer)
/LW (Enable Last Access Compare)
/NODELFLDR (No not delete folders)
/O (Set Target File Overwrite)
/OPTIMIZE (Optimize Performance)
/PERFORMANCE (Set Application Priority)
/PROGRESS (Display status in PeerSync)
/Q8BH+ (Enable the Historical Data Tab)
/QB (Use Full Access File Copy)
/QD (Always Use Partial Locked File Extensions List For EOFM)
/QG (Always use the local machine time for the Last Run Time)
/QH (Force Flush File Buffers)
/QI (Ignore Matching/Locked File Extensions)
/QJ (Ignore Matching/Locked File Postfix Replacement)
/QQ (Enable the File Copy Progress Tab)
/QQ<< (/QQ<< (Disable the Show Advanced Display link)
/QR (Exclude Common Job Exceptions in Event Processing)
/QY7 (XML File Creation Interval)
/QYD (Set Safety Value for Last Run Time)
/R (Real time Monitoring Argument)
/SNMP (Enable SNMP Error Reporting)
/Sx (Synchronization Timer Argument)
/SxKz (Synchronization Timer Argument with Keyboard Activity)
/T (Terminate All Instances of PeerSync
/TD (Display status in PeerSync upon completion)
/UDD (Use Device Driver method)
/W (Set Queue Directory Change Count)
/WPFIX (Disable application associated with sync)
/WPMOD (WordPerfect Fixes for synchronization)
/X (Disable Initial Synchronization During Startup)
/YC (Folder Queue Watch Interval)
/YD (Allow Replication During Dynamically Created Jobs)
/YF (Partial Locked File Extensions List)
/YK (Set Real-time Copy Thread Pool)
/YK:n (Set Real-time Copy Thread Pool)
/YL (Log Messages Only to a Log File by Filter and/or by Profile)
/YN (Use Network Password Dialog)
/YO (Retain Last Access Time for Two Machine bi-directional synchronization)
/YO- (Retain Last Access Time)
/YR (Delete Empty Source Folders After Move)
/YV (Do Not Validate Connections Before Profile is Loaded)
/YX:n (Set File Read/Write Buffer Delay)
/Z (Ignore Open File Extensions)
- 1 -
127.0.0.1
- A -
Accessing Open Files
Add - synchronize new files to target
Add Quick-Sync Folder option to Explorer menu
Add/Delete/Modify Jobs: Tool Buttons
Additional Configuration Entries
Additional Event Options
Additional Options
Enable file recovery
Perform binary comparison on all files (using CRC32)
Replace in-use files upon reboot
Additional Folder Selection Features
Additional/Alternate Target Paths
Use standard report file content
Administrative report file storage manipulation and organization
After each scan (log all non-scan events on the cycle specified)
After each scan/cycle even if no events occurred
After synchronization subtract/add x minute(s) from target
Allow Replication During Dynamically Created Jobs
Alternate Target Path Selection Dialog
Alternate/Additional Target Paths
Always create a super-set during bi-directional synchronization
Always Create Superset during Bi-directional Sync
Always Use Partial Locked File Extensions List For EOFM
Always use the local machine time for the Last Run Time
Append Default File/Folder Exclusions from PeerLock
Argument Selection from the Interface
ASCII
Attribute Exceptions
Automation Command Line Arguments:
Disable Initial Synchronization During Startup
Synchronization Timer Argument
Synchronization Timer Argument with Keyboard Activity
Run at specific times and selected days
Run on an interval every x minute(s)
Use enhanced real-time monitoring
- B -
Bi-directional Command Line Arguments:
Always Create Superset during Bi-directional Sync
Bi-directional Folder Deletion
Set Safety Value for Last Run Time
Use Enhanced bi-directional synchronization mode
Bi-directional Folder Deletion
bi-directional synchronization
bi-directional synchronziation
Blackout Settings
ByteReplicator
- C -
Carbon Copies - Email Reporting
Changing Profile Job List Window
Check for ACL changes during scans
Choose external applications/scripts to be run before and after the processing of a given Job
Command Line Argument Selection
Command Line Argument Selection from the Interface
Command Line Arguments
Configuration Command Line Arguments:
Load Alternate Configuration File
Configure Normal Source Folder
Configure Normal Target Folder
Connect to and monitor any PeerSync currently running on your LAN
Convert to GMT for comparison purposes
Copy Threads
Create a report for every event
Create a report on an interval
Create administrative Email messages
Create administrative report files
Create and Append Summaries into One Report
Create Normal Souce Auto Job Name
Create Normal Target Auto Job Name
Create SNC extension association for Profiler
Create Souce FTP Auto Job Name
Create Target TCP Auto Job Name
Create TCP Source Auto Job Name
Current Attributes
Current Command Line Argument Selection
- D -
Date variables for Folder Paths
Day variables for Folder Paths
Default Read/Write Buffer Size
Delay between Enhanced Real-Time Deletions
Delay between Enhanced Real-Time Event Processing
Delay between Enhanced Real-Time Queue Checking
Delete Empty Source Folders After Move
Delete log file after successful send
Delete Unmatched Target Files
Delete unmatched target files older than x days
Deleted file storage manipulation and organization
Deletion Options
Deletion Options Button
Disable application associated with sync
Disable Failed Connection Timer
Disable Initial Synchronization During Startup
Disable Jobs that are Not Configured from this Profiler
Disable Real-time Security Change
Display status in PeerSync upon completion
Dissimilar time zone synchronization
Do Not Validate Connections Before Profile is Loaded
Drag and Drop Source Folder Selection
Drag and Drop Target Folder Selection
During comparison subtract/add x minute(s) from target
Dynamic Network Drive Mapping and Un-mapping
Dynamic synchronization based on date
Dynamic synchronization based on logged on user or machine name
Dynamic synchronization based on personal folders or other variables read in from the registry
- E -
Easy way to synchronize folders on the fly
Edit Normal Source Variable File
Edit Normal Target Variable File
Create administrative Email messages
Delete log file after successful send
Report file name - Email Reporting
Use standard report file content
Embedded Open File Manager
Embedded Open File Manager Interval
Enable file recovery
Enable intelligent network load balancing
Enable intelligent network load balancing (when applicable)
Enable Passive Mode - FTP Source
Enable Passive Mode - FTP Target
Enable Summary Statistics Collection
Enhanced Real-Time Event Queue Delay
Enhanced Real-Time Event Upper Limit
EOFM
EOFM Interval
Evaluating a new version of PeerSync
Exceptions Screen:
Exclude Files by Character/String/Extension
Exclude Files from Sync by Size
Exclude Files in Sync by Attribute
Include File Types (using wild cards)
Include Files in Sync by Attribute
Exclude all open files until closed
Exclude Folders drop down list
Exclude Folders that have a Reparse Point
Exclude open files (allow read access to source file during transfer)
Exclude open files (deny all access to source file during transfer)
- F -
File Deletion Options
Add - synchronize new files to target
Avoiding Permanent Deletion
Delete Unmatched Target Files
Delete Unmatched: Options
Deletion Warning Message
Replicate - Delete unmatched files/folders
Update - synchronize existing files in target
Use Windows Recycle Bin
File Path Variables: Folder Selection
File Read/Write Buffer Size
File Recovery
File types to transfer as ASCII - FTP Source
File types to transfer as ASCII - FTP Target
Folder Creation Reporting Feature
Folder Names Reporting Feature
Folder Restoration feature in real-time
Folder Selection Screen:
Folder Selection Screen Overview
For each individual error message as it occurs
for each message/error as it occurs
Force Source Folder Root as Target FTP Folder Root
Force Source Folder Root as Target TCP Folder Root
- G -
Global bi-directional Options
Global Display Options - Profiler Options
Global Recovery/Offline Options
Disable Jobs that are Not Configured from this Profiler
Link this Profiler to PeerLock
Global Settings (PeerSync):
Greater Than File Size Exclusion
- H -
H+ (Skip setting of main form visible)
Host is using GMT - FTP Source
Host is using GMT - FTP Target
Hour variables for Folder Paths
- I -
Ignore File Size and/or Date Comparison
Ignore Matching/Locked File Extensions
Ignore Matching/Locked File Postfix Replacement
Ignore Target Space During File Copy
Include attribute change as synchronization criteria
Include open files (allow read & write access to source file during transfer)
Include open files (allow read access to source file during transfer)
Include open files (if possible)
Include Sub foldersFolder Selection Screen:
Information Required to Register software
initiate scan on trigger file change
Initiate Synchronization on Source or Target File/Folder Change
Installation Configuration Options
Intelligent Network Load Balancing
- J -
Job Settings (PeerSync):
Append Default File/Folder Exclusions from PeerLock
Job Threads
Jobs
- K -
Keep backup files of overwritten Target Files
Keep files in Alternate Folder
Keep multiple versions of files
- L -
Large File or Compression Status
Launch (PeerLock)
Launch (PeerSync)
Left side Panel - Selection Tree
Limit CPU usage during file transfers
Limit number of processors to use
Limit system resources during file transfers
Link this Profiler to PeerLock
List of Exclude Files (using sub strings)
List of Include File Types (using wild cards)
List of Job Selections - Daily Timer
Load Alternate Configuration File
Log file storage/manipulation/organization
Log Messages Only to a Log File by Filter
Log Messages Only to a Log File by Filter and/or by Profile
Log Messages Only to a Log File by Profile
Log Service Events to the Event Viewer
loopback
- M -
Always Use Partial Locked File Extensions List For EOFM
Maximum Number of Events to Process
Maximum speed - compression option
Menu (PeerSync):
Minute variables for Folder Paths
Monitor ACL changes during real-time
Monitor PeerSync activity across the LAN
Monitor Remote Instances of PeerSync
Month variables for Folder Paths
Move Files
MS Windows Explorer Add On - Quick-Sync
- N -
Number of backup files to keep
- O -
Only use Advanced Settings
Open File Manager
Open Files
Open Source Folder
Options/Commands
Options/Commands Features
Options/Commands Overview
Options/Commands Screen:
Overview
Set Access Password
Show tray icon
Overview
Overwrite existing Pre-Sync report file
- P -
Parameter Selection from Profiler
Partial Locked File Extensions List
Password for Tray Icon
pause scan during specific times
Pause Service (PeerLock)
Pause Service (PeerSync)
PeerLock Selection Tree Category
PeerLock Service:
Launch PeerLock
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
PeerSync Command Line Arguments
PeerSync Selection Tree Category
PeerSync Service:
Launch PeerSync
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
PeerSync Status Display Popup Menu
Perform binary comparison on all files (using CRC32)
Performance
Performance Command Line Options:
Limit CPU usage during file transfers
Limit number of processors to use
Limit system resources during file transfers
Set File Read/Write Buffer Delay
Set Real-time Copy Thread Pool
Set the percentage of copy threads to reserve for real-time events
Performance Options All Jobs
Performance Package
Performance Priority Selection
Enable intelligent network load balancing (when applicable)
Set maximum number of copy threads to x
Throttle bandwidth - Use x percent of available bandwidth
Pop Up Menu: Profile Job List
Post Installation Configuration Options
Pre Installation Configuration Options
Pre/Post Process Overview
Select Application/Script to Run After
Select Application/Script to Run Before
Use maximum wait time of x seconds
Wait for application to end before continuing
Preserve Paths
Process Delay for Enhanced Real-time Changes
Product Definitions
Product Support
Hiding Profile Description Toolbar
Moving Profile Description Toolbar
Selecting Jobs and Multiple Jobs
Profiler
Profiler Command Line Arguments
Profiles
PSError.log
- Q -
- R -
Real time File Folder Change Detection
Real Time Mode
Real-Time Command Line Arguments:
Disable Real-time Security Change
Set Delay between Enhanced Real-Time Deletions
Set Delay between Enhanced Real-Time Event Processing
Set Delay between Enhanced Real-Time Queue Checking
Set Enhanced Real-Time Event Queue Delay
Set Enhanced Real-Time Event Upper Limit
Set Maximum Number of Events to Process
Set Process Delay for Enhanced Real-time Changes
Set Real-time Copy Thread Pool
Real-Time Event Detection Options
receive an e-mail at start of profile
receive an e-mail at stop of profile
Registering Evaluation Copy of PeerSync
Registering Unregistered Copy of PeerSync
Entering User ID/Password (Evaluation Copy)
Registry variables to use in Folder Paths
Replace in use files upon reboot
Replicate - Delete unmatched files/folders
Replication
Report file name
Reporting Command Line Arguments:
Create and Append Summaries into One Report
Display status in PeerSync upon completion
Enable Summary Statistics Collection
Log Messages Only to a Log File by Filter
Log Messages Only to a Log File by Filter and/or by Profile
Log Messages Only to a Log File by Profile
Log Service Events to the Event Viewer
Skip setting of main form visible
Suppress connection of PeerSync to the Profiler
Reporting Screen:
Reporting Standard report file content
Reporting Summary Information Only
Resume Service (PeerLock)
Resume Service (PeerSync)
Retry failed connections every x minutes
Retry open files every x seconds
Revisioning
Root Path - TCP Source
Run Embedded Open File Manager every x minutes
Run a Pre-Sync Report (do not sync files/folders)
Run application at start of PeerSync
Run as a service (PeerLock)
Run as a service (PeerSync)
Run at specific times and selected days
Run External applications/scripts before and after the processing of a given Job
Run selected Jobs at a specific time of day
Run/View (PeerLock):
Launch PeerLock
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
Run/View (PeerSync):
Launch PeerSync
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
Run/View Current Profile Activity Screen:
Running Jobs vs. Running Profiles (Run a Quick Sync)
- S -
Scheduled Mode
Select a folder for deleted files to be placed
Select Application/Script to Run After
Select Application/Script to Run Before
Select days of the week to run Jobs
Selection Tree: Customize Options
Service (PeerLock)
Service (PeerSync)
Set Access Password
Set Alternate/Additional Normal Targets
Set Deletion Move To Folder Cleanup Interval
Set File Read/Write Buffer Delay
Set FTP Failed Upload Retry Count
Set maximum number of copy threads to x
Set maximum number of retries to x
Set Queue Directory Change Count
Set Real-time Copy Thread Pool
Set Safety Value for Last Run Time
Set the maximum log file size to x bytes
Set the percentage of copy threads to reserve for real-time events
Show Advanced/Normal Display PeerLock
Show Pre-Sync report file at end of run
Show Tray Icon
Silent Installation
Simple Network Management Protocol reporting
Skip setting of main form visible
Source File/Folder Alterations
Source Folder Selection
Source to Target Combination Settings
Source-target backup/synchronization scenario
Start Service/Application (PeerLock)
Start Service/Application (PeerSync)
Stop Service/Application (PeerLock)
Stop Service/Application (PeerSync)
store events while connection is down
store missed events and process on reconnect
Suppress connection of PeerSync to the Profiler
Suppress Reboot during Install
Swap Source and Target Folders
Synchronization
Synchronization Command Line Arguments:
Allow Replication During Dynamically Created Jobs
Always use the local machine time for the Last Run Time
Delete Empty Source Folders After Move
Disable application associated with sync
Disable Failed Connection Timer
Do Not Validate Connections Before Profile is Loaded
Exclude Folders that have a Reparse Point
Ignore File Size and/or Date Comparison
Ignore Matching/Locked File Extensions
Ignore Matching/Locked File Postfix Replacement
Ignore Target Space During File Copy
Partial Locked File Extensions List
Run application at start of PeerSync
Set Deletion Move To Folder Cleanup Interval
Set Queue Directory Change Count
Terminate All Instances of PeerSync
Use Alternate Copy File Methods
WordPerfect Fixes for synchronization
Synchronization of files between dissimilar time zones
Synchronization Timer Argument
Synchronization Timer Argument with Keyboard Activity
Synchronize ALL files via Managed Files
Synchronize open/locked files via Managed Files
Synchronize Selected Jobs Option
- T -
Target File Time Change Option
Target File/Folder Alterations
TCP Source Port Configuration Tab
TCP Target Port Configuration Tab
TCP Wan Connector Option
| Source Folder Selection |
| Source Folder Configure Button |
| Target Folder Selection |
| Target Folder Configuration Button |
Temp Files
Terminate All Instances of PeerSync
Threads
Throttle bandwidth - Use x percent of available bandwidth
Time variables for Folder Paths
Settings Screens Drop-Down List
Transfer Time Reporting Feature
Tray Icon
Turn file archive attribute off after synchronization
- U -
Uninstall previous versions of PeerSync
Update - synchronize existing files in target
Updated Files Reporting Feature
Use Alternate Copy File Methods
Use Block Byte Level Synchronization
Use block/byte level synchronization
Use Embedded Open File Manager
Use Enhanced bi-directional synchronization mode
Use enhanced bi-directional synchronization mode options
Use enhanced real-time monitoring
Use error information only
Use intermediate file during copy:
Use maximum wait time of x seconds
Use Proxy - Firewall - FTP Source
Use Proxy - Firewall - FTP Target
Use standard report file content
Use summary information only
Use Variables for folder paths stored in registry
Using Wild Cards for files to Include
- V -
Validate target file (using CRC32)
Validation Options
View Alternate Target Path Selection
View Log File
View PeerSync activity across the LAN
VSS
- W -
Wait for application to end before continuing
Web Farms
What email address to send from
Window: Changing Height of Profile Job List
Windows Explorer Add On - Quick-Sync
Windows Variables for Folder Paths
WordPerfect Fixes for synchronization
Working With Jobs
Working with Profiles
- Y -